Guide And Cost Of Digging Well In Nigeria (2024)

Need a guide on digging well in Nigeria? Need to know how much digging well in Nigeria would cost you? Then this article is for you.

It is impossible to overstate the value of water in daily life because it is a free gift from nature. People maintain water in tanks, jugs, and other containers because we all need it for drinking, washing, cleaning, and a number of other functions.

Man has devised means to obtain water as a result of his need for it. Water had to be located, especially in arid regions devoid of streams. This prompted the development of Wells, which involves delving far beneath the surface of the ground in search of water. If you didn’t have a dependable source of water in Nigeria, you would be at a disadvantage.

In Nigeria, hand-dug wells are quite common, but manually drilled wells are a growing trend. Five operators are required along with a small gasoline pump for this straightforward drilling technique. It is also referred to as seismic drilling or hand turning.

Related: Guide and Cost of Borehole Drilling in Nigeria

Guide on the Process of Digging Well in Nigeria

Here is a guide on the process of digging a well in Nigeria:

Choosing A Good Location

Wells for water supply are not positioned close to homes or other structures. They are typically built 5 metres or so away from the house. There shouldn’t be any groundwater in the area where the well will be placed. If not, it would be necessary to spend more money to seal the building.

Read Also:  Price of Floor Tiles in Nigeria (Per Square Meter)

Digging the Pit

It is simpler to rent specialised equipment for such work. Up till water is discovered, the pit would be dug. Some regions wouldn’t require a lot of digging, especially those near rivers where water is readily available.

However, dry land sections could need to be dug up further, which raises the expense that must be paid. Either a machine or a person can dig. Digging by hand takes a lot of effort and time. Sand and gravel would be poured into the bottom after digging.

Installation of Rings

Laying the bottom plate is necessary to complete the lower tier. For the purpose of designating the area as the “well,” rings can be thought of as a boundary. Depending on the size of the rings and the depth of the area being dug, a certain number of rings must be employed.

The rings can be between 10 and 90 cm tall, and between 70 and 200 cm in circumference. The junction is reinforced with metal staples, and the rings to be installed are mounted with a truck cran.

There would be an outer ring or ring for the top of the well after the inner rings had been placed. The well is shielded from dirt entry by this ring, which is made of a metal cover.

Cost of Digging Well in Nigeria

If you have the right personnel, digging a well is not particularly difficult. Workmanship should cost between N30,000 and N50,000 for manually dug wells, depending on your location and the individual’s level of expertise.

Wells dug by machines can cost between N100,000 and N150,000, which is a significant premium. The price of a standard ring should be around N4500, but it could be higher or lower depending on the vendor and the country’s economic climate. However, it is impossible to provide an estimate because the depth of a well and the number of rings needed can only be determined through measurement.

Read Also:  Cost of Blocks in Nigeria: How Much is Block in Nigeria


This piece has given a relevant guide on digging well in Nigeria. We have also discussed explicitly, the cost of digging well in Nigeria. Have any questions? Please use the comment section below for that. Thank you for reading!

Similar Posts